Check and adjust the sound output.Īdjust the volume, treble, and bass using the equalizer controls. When using a cellphone, put your device in airplane mode to avoid interference. Put the mixer’s Gain, Fader, and Master Volume button to minimum levels. Set the channel buttons to minimum levels. Plug the other end of the cable into the “Line-In” port of the mixer.Plug one end of the cable into the headphone jack of your device.The sound quality of the source component’s audio output defines the ability of a stereo system.įollow these steps to connect your source component to the mixer: These include CD-DVD players, cellphones, and laptops. Source components are the most important parts of the audio system. Connect the source components to the mixer. Connect the speaker to the stereo output of the mixer. Connect the speaker to the mixer.īefore connecting, make sure the two components are turned off. Coil the excess cable at the bottom of the speaker stand to prevent accidents. If possible, keep the cable short to prevent interference. Speaker cable connects speakers to other sources. Follow the same procedure when checking the powered speakers. Check if the buttons are well-functioning. Make sure all the channel buttons – EQ, Master Volume, etc. To know if your mixer and speakers are functioning properly, check them first. Do not let the two components touch each other. Place the mixer at the back of the powered speaker.Make sure the speaker is in front of all the microphones. Place the powered speaker in front of the audience.Proper positioning of the components is important to achieve the best audio amplification. Unbalanced connections should be kept short to reduce noise and interference. Unbalanced lines – more susceptible to induced noise problems.TRS and XLR jacks transmit audio signals from a balanced device to another.
They are ideal to use for long cable runs.
Balanced lines – have the ability to reject induced noises.The two types of connection are balanced and unbalanced lines. This will help you avoid interference or noise. To successfully connect powered speakers to your mixer, follow these steps: 1. This is the circuit that sends audio signals to other devices. You can adjust the volume using this button. This button does not disable the whole audio system – it just puts the mixer in “solo mode”.
This button adjusts the precision and flexibility of sound frequencies. Phantom Power – used for condenser microphones. It sets the Left/Right position of the channel in the stereo field. It prevents distortion of sounds as they pass through the channel. Aux – sends a secondary feed of audio signals to another destination.Fader – adjusts the audible signal from the channel.Gain – refers to the loudness of sound.Normally, each channel contains the following buttons: The number of input channels indicates the number of sources you have.
0 kommentar(er)
